One size does not always fit all when it comes to canoes.
The iTi, our Va'a Hoe designed specifically for smaller and lighter paddlers, between 1m25 to 1m65 (4' 1.5" to 5' 5") / 30 kg to 70 kg (65 lbs to 155 lbs) even though it can easily handle paddlers a bit outside that height / weight range, small frame adults and younger paddlers alike.
Smaller paddlers' performance is hindered by standard V1's long waterline and volume. Lack of maneuverability and lack of control are the most common issues encountered by small frame paddlers using ill-proportioned canoes.
Additionally, the seating height and high gunnels of a typical V1 present challenges for small paddlers as they inhibit the paddle change-overs while also making the process of having one's leg reach the water to assist in doing a hard turn practically impossible or, at best, uncomfortable.
The iTi was designed with maneuverability and ergonomics as key components to address these important issues for smaller and lighter paddlers. It also needed to be a fun canoe that's fast and had true surf capabilities. So, over a few iterations of the design, the waterline length, the volume and the rocker were adjusted in order for it to perform in all conditions the paddlers might throw at it.
Turning the iTi around a buoy becomes an easy task. Losing a race due to inefficient turns on an ill fitted V1 becomes a thing of the past. The waterline of the iTi was optimized for small frame paddlers giving them back control of their boat rather than slipping around on a bump or having too much windage on a typical canoe that floats too high due to their lower weight.
Introducing the iTi
(coming soon in 2025)
This V1 is a game changer for smaller and lighter paddlers. But don't take out word for it: try it yourself and feel the difference!
The iTi V1 will soon be available worldwide in Outrigger Zone's 100% prepreg carbon fiber cured in autoclave so stay tuned for the most advanced V1 designed for small frame paddlers! Until then, the iTi V1 is only available to order in Tahiti.
IMPORTANT NOTE: the photos depicting the iTi on this page show a prototype with traditional rigging while the final version of the iTi will feature snap in iatos to simplify the rigging process while optimizing control and performance.
Specifications
Size
Length 616 cm
20 ft 2 1/2 in
Width 39.5 cm
15 1/2 in
Hull Weight (includes adjustable foot rest, pumps and seat)
iTi TBA kg
TBA lbs
iTi pro TBA kg
TBA lbs
The iTi will come in 2 versions: standard and pro.
Both standard and pro versions are built in a one-piece monocoque construction with 100% prepreg carbon fiber cured in autoclave at high temperature and high pressure.
Standard and pro construction layup
Outer 3 layers of prepreg unidirectional carbon fiber @ 0 / 90 / 0 + reinforcements
Core Polymethacrylimide (PMI) based structural foam
Inner 2 layers of prepreg unidirectional carbon fiber @ 0 / 90
Modified painting process for weight reduction for the FAI 4si pro model
iTi “ When creative freedom and personalization matters most for those seeking a light, strong and fast Va'a“
The 100% prepreg carbon fiber construction layup is ideal for the V1 aficionado, looking for a light, strong and fast Va'a whether for fun sessions on the water or for racing against the best Aito and Va'ahine!
You can customize your iTi with 16 colors for the hull, ama and logos in any combination you’d like. You can add customizations such as a deck/hull split, a colored cockpit, graphics from our catalog or a custom graphic you bring. The 100% prepreg carbon fiber iTi comes with fitted dust covers for its hull, ama and iatos.
iTi pro “ When every ounce counts to gain a competitive edge “
The pro construction layup was created for paddlers looking for the best in Va'a construction in order to gain a competitive edge as well as those looking for the lightest V1 possible in order to make carrying and transporting it a breeze.
Most of the weight reduction stems from the paint used and painting process, limiting the amount of paint applied and sanding it down to a thin layer, giving the pro model a distinctive sanded-through look.
To keep the weight low, pro model hulls can only be 5 colors (pro Grey, pro White, pro Green and pro Yellow) and customizations options are limited to coloring the cockpit and logos. The ama can be any color and, unlike the standard model, the iakos can be colored.
The iTi pro comes with thicker, UV resistant fitted acrylic marine canvas covers for its hull, ama and iatos for better protection.
FEATURES
Adjustable foot rest outfitted with foot pumps
Adjustable EVA foam ergonomic seat
Carbon Fiber Ama for the standard and pro models
Carbon Fiber Iatos
Hull cover + Ama cover + Iatos cover for the standard carbon model
Upgraded AMC covers for the pro model (for the hull, ama and iatos)
